Keeping dirt and dust out of your intake is the number one goal for UTV owners. Since the majority of riding is done in the dirt, a common issue is having dirt surpass the factory Donaldson filter on your Can-Am X3. Another problem is the factory intake not allowing enough air to enter the engine which can hold you back from achieving your power goals.

Agency Power introduced the oiled cold air intake kit for your Can-Am to solve the biggest issue with the X3. The oiled filter offers substantial filtration while promoting unbeatable airflow. Installing the Agency Power oiled cold air intake will not only improve performance but offer incredible dirt and dust mitigation within your intake and engine.

Find Out More About The Agency Power Oiled Cold Air Intake

The aluminum construction of the Agency Power oiled intake kit increases the airflow and improves throttle response. Increasing the volume of air flowing through the intake will significantly improve the power output of your X3 while providing a gentle growl. This will give your X3 a pleasant tone without being too aggressive.

Factory Intake Dyno Graph

Agency Power Oiled Intake Dyno Graph

As the graphs show, the Agency Power intake increases the power output from 146HP to 163HP. This is a significant gain considering all that was changed was an intake and a tune. Tuning your machine with an intake will provide exceptional throttle response paired with the gain in power that will truly put you back in your seat.

Don’t Forget To Tune Your Machine!

Since the factory Donaldson filter is dry, it allows fine particles to pass through which can slowly build up in your engine. Having dirt build up inside your engine will eventually start to wear out your cylinder walls as the dirt is an abrasive material. Scoring the cylinder walls will decrease the efficiency of your piston rings and result in exaggerated blow-by and loss in compression.

Incorporating the oiled filter with the intake pipe will eliminate fine particles from entering your engine. Maintenance is easy as the filter can be washed and re-oiled with ease. Simply wash the filter with water to release the trapped dirt and grime. Afterward, allow the filter to dry, re-apply oil to the filter media, and install the filter.

To double down on filtration, a pre-filter can be purchased HERE. Using a pre-filter will lessen the chances of rocks, dirt, and even water droplets getting sucked into the intake or getting caught in the filter ribs.

Click Here To Purchase Your Pre-Filter For Your X3 Intake!

Features:

• High flow, reusable oiled air filter
• Precision cut intake plate with Frogzskins
• Black powder coat finish
• Dyno proven results
• Improves filtration compared to the factory intake
• Eliminates dirt and fine dust from entering the engine