Tag Archives: UTV
Can-Am X3 Turbo Intake Instructions
This guide is to help with the installation of the Agency Power Can-Am Maverick X3 Turbo Intake. STEP 1 – Remove the plastic intake cover, intercooler vent, and engine access cover. STEP 2 – disconnect the breather hose from factory air box. STEP 3 – Loosen the hose clamps on the intake… Read More
How to Install Agency Power Wastegate Can-Am Maverick X3
This guide is to help with the installation of the Agency Power Wastegate on the Can-Am Maverick X3. Note: For the VR Tuned 195HP package, we recommend setting the wastegate to 1 FULL turn in from neutral. For the VR Tuned Big Injector kit, we recommend setting the wastegate to 2 FULL… Read More
How to Install Agency Power Race Pipe Can-Am Maverick X3 Turbo
How to Install Agency Power Race Pipe on the Can-Am Maverick X3 Turbo This guide is to assist with the installation of the Agency Power Race Pipe on the Can-Am Maverick X3 Turbo. Estimated Installation time: 30-60 minutes Recommended Tools for Installation: 3/8 or 1/4 ratcheting wrench with extensions 8mm socket 10mm… Read More
Heavy Duty Radius Rods now Available for the Can-Am Maverick X3 RS & X3 RS Max
Agency Power Adjustable Rear Radius Rod Set Can-Am Maverick X3 RS Upgraded rear radius arms for the Can-Am Maverick X3 is one of the most important mods you can do. Being able to adjust camber and toe settings will be a huge help in how your vehicle handles. Even more important is… Read More
How to Install Agency Power Premium Front Grille on Can-am X3 | X3RS | X3DS
How to Install the Agency Power Premium Front Grille on Can-am X3 | X3RS | X3DS Tools Required for installation 5mm Allen Wrench 10mm Open End Wrench Estimated Install Time: 15-20 min Step 1: The OEM front Grille is only held in place by push clips. Pull outward on the grille to… Read More
Polaris RZR Vented Engine Cover Installation
The Installation of the Agency Power Vented Engine Cover for the Polaris RZR XP, XP4 1000 and XP Turbo is extremely easy. Estimated Install Time: 5-10 minutes. Step 1: Remove the factory engine cover by lifting up on the latch as shown. Step 2: Remove the factory ball style latch and replace… Read More
