Tag Archives: how to install
Can-Am X3 Big Injector Installation by Agency Power
This guide is to assist with the installation of the Agency Power Big Injector Upgrade for the Can-Am Maverick X3 Turbo. These are 1065cc at 3bar fuel pressure. Designed to be used with standard unleaded fuel. Tuning is required to maximize the performance of your Can-Am X3. Step 1: Remove the two… Read More
Agency Power Upgraded Camshafts Installation for the Can-Am X3
We hope you have found this link as a new purchaser of our Camshafts for your Can-Am Maverick X3 Turbo. These are a direct drop in and will take you about 6 hours to do the install with the proper tools. These installation steps are showing you what was done to swap… Read More
How to Install Agency Power Race Pipe Can-Am Maverick X3 Turbo
How to Install Agency Power Race Pipe on the Can-Am Maverick X3 Turbo This guide is to assist with the installation of the Agency Power Race Pipe on the Can-Am Maverick X3 Turbo. Estimated Installation time: 30-60 minutes Recommended Tools for Installation: 3/8 or 1/4 ratcheting wrench with extensions 8mm socket 10mm… Read More
Can-Am Maverick X3 Rear Radius Rod Installation
Agency Power Rear Radius Rods – Can-am Maverick X3xRS & X3xRS Max Installation We recommended the the installation and alignment be performed by a qualified professional. Step 1: Loosen the lug nuts on both rear wheels and lift the vehicle so that there is no tension on the rear of the suspension.… Read More
How to Install Agency Power Premium Front Grille on Can-am X3 | X3RS | X3DS
How to Install the Agency Power Premium Front Grille on Can-am X3 | X3RS | X3DS Tools Required for installation 5mm Allen Wrench 10mm Open End Wrench Estimated Install Time: 15-20 min Step 1: The OEM front Grille is only held in place by push clips. Pull outward on the grille to… Read More
How to Install Agency Power Valvetronic Exhaust Polaris RZR XP Turbo & XP4 Turbo
Installation overview of the Agency Power Valvetronic Exhaust System for the Polaris RZR XP Turbo & XP4 Turbo. PDF Version of these instructions available HERE Removing the factory muffler. Please Note: If your Polaris RZR is equipped with an aftermarket bumper/cage, removal of it may be required for installation. Step 1: Remove… Read More