Tag Archives: Ford
Ford Raptor / F-150 EcoBoost Intercooler Upgrade
The factory F-150/Raptor intercooler is a known Achilles heel to the potent EcoBoost engine. The factory intercooler is undersized and in a location that restricts airflow, leading to a substantial loss in power when you need it most. [ SHOP NOW ] The engineers at Agency Power developed this… Read More
The Best Intake for the Ford F150 and Raptor
The VR Performance cold air intake is a must for any Ford F150 and Raptor EcoBoost owner. Driving an F150 without this intake would be doing the engine a disservice. The VR Performance cold air intake kit improves the 2.7L or 3.5L EcoBoost throttle response, improves boost response, and increases horsepower and… Read More
Tech Talk: Why Upgrade Your Vehicle’s End Links?
Agency Power has been engineering and manufacturing suspension components since 2004 for a wide variety of vehicles. Often overlooked when dialing in a vehicle’s suspension setup is the seemingly simple anti-roll bar end link. When a car is lowered, the suspension geometry changes, from control arm, tie rods, to even the sway… Read More
Intercooler Upgrade for Raptor and 3.5L EcoBoost F-150.
After a two year stalemate, Ford re-released the Raptor with a whole new face-lift and a massive powertrain difference. Most people associated the Raptor with having the beefy 411hp-6.2L V8, or the 310hp-5.4 V8. Ford threw a curve ball and offered the second generation Raptor with the twin turbocharged 3.5L, V6 EcoBoost… Read More
How To Install Agency Power Air Intake Kit On The 2017-2018 Ford Raptor 3.5L
This Install Guide is intended to help with the installation of the Agency Power Air Intake Kit on the 2017-18 Ford Raptor with 3.5L. Installation should be similar on the 15-18 F-150 2.7L/3.5L EcoBoost and 2018 3.5L Expedition. INSTALL DIFFICULTY: Step #1 Install the weatherstripping onto the intake box new air box.… Read More
How to Install the Ford Mustang EcoBoost Intercooler
The new Ford Mustang EcoBoost intercooler is a must have to bring those temperatures down and the efficiency of the 2.3L turbo up! Installation is not difficult and major cutting is not required. What the intercooler looks like: Installation is a simple remove and replace of the factory intercooler. Once all the… Read More
