Tag Archives: DIY
How to Install Intake Manifold Spacer Ford Focus RS
This guide is to assist with the installation of the Agency Power Intake Manifold Spacer on the Ford Focus RS. Always refer to vehicles service manual for torque specifications on OEM hardware. Parts included: 1x Agency Power Intake Manifold Spacer 1x Replacement Genuine Ford Gasket kit 5x Extended Replacement Manifold Hardware Step… Read More
How to Install Agency Power Lowering Springs | McLaren 570s
This guide is to assist with the installation of the Agency Power Lowering Springs on the 2015+ McLaren 570s. Notes Professional installation is highly recommended. Vehicle Alignment is highly recommended after installation. Always refer to vehicles service manual for torque specifications on OEM hardware. Parts included: Front Lowering Springs Rear Lowering Springs… Read More
How to Install Agency Power 6-Speed Short Shifter in Subaru STI
This guide is to help with the installation of the Agency Power 6-Speed Short Shifter Subaru STI 2004-2017 Order own Agency Power 6-Speed Short Shifter by CLICKING HERE STEP 1: Securely lift the car and locate this reverse linkage on the driver side of the transmission. You will need to line up… Read More
How to Install Agency Power Air Intake Kit on the 2016+ Ford Focus RS
This install guide is intended to help with the installation of the Agency Power Air Intake Kit on the 2016+ Ford Focus RS. Estimated Install time: 20 Minutes Difficulty of Install: Easy Tools required for install: 8mm socket or 8mm nut driver 7mm socket or 7mm nut driver Flathead screw driver (optional)… Read More
How to Install The Carbon Fiber Rally Wing on Subaru Hatchback WRX STI
This DIY guide will help you with the installation of the VR Aero Carbon Fiber Rally Wing for the 2008-2014 Subaru WRX & STI Hatchback. Tools Required: 10MM Deep Socket 3″ or 4″ Extension Small Flat Head Screwdriver Phillip Screw Driver Other: 3M Double Sided Tape Friend to assist Step #1: Order… Read More
How to Install Agency Power Race Downpipes on the BMW F80 M3 & F82 M4 DIY
This guide is to help with the installation of the Agency Power Race or High Flow Downpipes on the BMW F80 M3 & F82 M4. Install Time: 2-3 hours Step 1) Purchase your Agency Power Race Down pipes by clicking here Since we need to unplug the oxygen sensors in order… Read More
