Tag Archives: DIY
Can-Am X3 Turbo Intake Instructions
This guide is to help with the installation of the Agency Power Can-Am Maverick X3 Turbo Intake. STEP 1 – Remove the plastic intake cover, intercooler vent, and engine access cover. STEP 2 – disconnect the breather hose from factory air box. STEP 3 – Loosen the hose clamps on the intake… Read More
How to Install Agency Power Adjustable Blow-Off Valve Kit on Polaris RZR XP Turbo
This guide is to assist with the installation of the Agency Power Adjustable Blow-Off Valve kit on the Polaris RZR XP Turbo 16-18 Step 1. Remove the stock diverter valve by cutting and removing the two pinch clamps retaining the diverter valve to the charge pipe and intake return hose. Remove the… Read More
How to Install Agency Power Race Pipe Can-Am Maverick X3 Turbo
How to Install Agency Power Race Pipe on the Can-Am Maverick X3 Turbo This guide is to assist with the installation of the Agency Power Race Pipe on the Can-Am Maverick X3 Turbo. Estimated Installation time: 30-60 minutes Recommended Tools for Installation: 3/8 or 1/4 ratcheting wrench with extensions 8mm socket 10mm… Read More
How to Install Agency Power Radius Rods Polaris RZR XP 1000 | XP Turbo
Install overview of the Agency Power Radius Rods for the Polaris RZR XP 1000 & XP Turbo. Step 1) Before getting started, jack up the rear of the RZR and secure with jack stands. Remove both rear wheels to make the installation easier. Step 2) Loosen and remove the four bolts located… Read More
Agency Power Polaris RZR Grille Installation
The installation of the Agency Power Grille on the Polaris RZR XP & XP4 1000 is extremely easy and takes under a minute to install. Step 1. Remove the factory grille push in on both tabs and pull outward to remove from RZR. Step 2. Next insert the new Agency Power Grille… Read More
Ford Focus RS Throttle Body Spacer Install Guide
This guide is to assist with the installation of the Agency Power Throttle Body Spacer for the Ford Focus RS. PLEASE NOTE: THIS IS NOT A STEP BY STEP GUIDE. REMOVAL OF THE MANIFOLD IS NOT REQUIRED FOR INSTALLATION. INSTALLATION OF THE AGENCY POWER THROTTLE BODY CAN BE COMPLETED FROM UNDER THE… Read More
