Tag Archives: can-am
What’s new with Agency Power?
The team at Agency Power has been hard at work for the past few months preparing for 2020. With the UTV market growing faster and faster, Agency Power kicked it up a gear and went to the grindstone. New parts for Honda Talon, Polaris RZR XP Turbo, and Can-Am Maverick X3 have… Read More
ADS Motorsports – Can-Am X3 – Featuring Agency Power Valvetronic Exhaust
When ADS Motorsport needed an exhaust system for their most recent Can-Am X3’s builds they went with our Agency Power Valvetronic Exhaust System.
Can-Am X3 Turbo Intake Instructions
This guide is to help with the installation of the Agency Power Can-Am Maverick X3 Turbo Intake. STEP 1 – Remove the plastic intake cover, intercooler vent, and engine access cover. STEP 2 – disconnect the breather hose from factory air box. STEP 3 – Loosen the hose clamps on the intake… Read More
How to Install Agency Power Wastegate Can-Am Maverick X3
This guide is to help with the installation of the Agency Power Wastegate on the Can-Am Maverick X3. Note: For the VR Tuned 195HP package, we recommend setting the wastegate to 1 FULL turn in from neutral. For the VR Tuned Big Injector kit, we recommend setting the wastegate to 2 FULL… Read More
How to Install Agency Power Adjustable BOV and Silicone Hose Can-Am Maverick X3 Turbo
This guide is to help with the installation of the Agency Power Adjustable BOV and Silicone Hose on the Can-Am Maverick X3 Installation Step1: Locate the factory silicone boost hose on top of the engine/under the intercooler. Loosen the two 8mm worm drive clamps and remove the factory silicone hose from… Read More
How to Install Agency Power Race Pipe Can-Am Maverick X3 Turbo
How to Install Agency Power Race Pipe on the Can-Am Maverick X3 Turbo This guide is to assist with the installation of the Agency Power Race Pipe on the Can-Am Maverick X3 Turbo. Estimated Installation time: 30-60 minutes Recommended Tools for Installation: 3/8 or 1/4 ratcheting wrench with extensions 8mm socket 10mm… Read More
