Tag Archives: can-am maverick x3
Do You Need Upgraded Radius Rods?
Radius rods are a fundamental component of a UTV as it is what keep your wheels aligned when the suspension travels up and down. Unfortunately, most manufacturers are taking the cheap route and constructing them out of hollow tubing. This is proving to be a burden to many UTV owners as hitting… Read More
What Does a Turbo Blanket Do?
The purpose of a turbo blanket is to insulate the turbocharger so it does not transfer heat to surrounding components. Of course, the most beneficial gain from a turbo blanket is quicker spooling along with cooler intake air temperatures (IAT). By retaining heat within the turbocharger, the air passing through is thinner and… Read More
Utility, Rigidity, and Style With One Product For Your X3!
Serious UTV racing requires some serious reinforcement to the chassis of your X3. Due to the “tube chassis” design, there are certain areas that flex more than others, and one of these areas happens to be the radius rod mounting points. The Agency Power Billet Radius Rod Plate with a built-in D-Ring… Read More
How To Install Agency Power Rear Bulkhead Support Links On Can-Am X3
In this guide, we will be going over the step-by-step instructions on how to install the Agency Power rear bulkhead support links. Note: The bulkhead supports only work with the Agency Power radius rods or 5/8th heim joints. Installation Difficulty: Estimated Install Time: 45 minutes Tools Needed: 3/8th Ratchet 18mm socket Floor… Read More
Agency Power Can-Am X3 Interior Kit Installation Guide
In this guide, we will be going over the installation process of the Agency Power interior kit step-by-step on your Can-Am Maverick X3. Installation Difficulty: Estimated Install Time: 45 minutes for the whole kit Tools Needed: Electric Drill With 5/32nd Drill Bit 3/8th ratchet HW4 Bit – 4mm Allen 13mm Wrench Scribe… Read More
Agency Power Can-Am X3 Door Spring Kit Installation Guide
This is a step-by-step guide on how to install the Agency Power door spring kit on your Can-Am Maverick X3! Installation Difficulty: Estimated Install Time: 15-20 minutes per door. Tools Needed: 3/8 Ratchet 13mm Socket T-30 Torx Bit HW4 Bit – 4mm Allen Key HW5 Bit – 5mm Allen Key Front Doors Installation… Read More
