Tag Archives: aparmy
How To Install Agency Power Mercedes Benz G-Class Exhaust System Includes 4×4 Squared
This guide is to help with the installation of the Agency Power Exhaust for Mercedes Benz G-Class Including 4×4². Install Level: Find the 3 bolt flange connecting muffler to mid pipe on each side of the vehicle. Agency Power recommends spraying some penetrating oil on the bolts to allow for easier removal. Remove the… Read More
How To Install Agency Power VW GTi Mk7 Catback Exhaust System
This guide is to help with the installation of the Agency Power Catback Exhaust for VW GTi Mk7. Install Level: Remove 4 bolts holding brace and put to side to be re-installed later. Unbolt factory slip fit clamp. Then push 3 hangers out of bushing to remove the factory system. Once removed… Read More
How To Install Agency Power Cold Air Intake System On Kia Stinger GT
This Install Guide is intended to help with the installation of the Agency Power Cold Air Intake System on the 2018 – 2019 Kia Stinger GT with 3.3L TT V6. A PDF of these instructions can be found HERE Unbolt 2 bolts holding cross support bar on driver then repeat on passenger side.… Read More
HOW TO INSTALL AGENCY POWER BLOW OFF VALVES ON KIA STINGER GT
This Install Guide is intended to help with the installation of the Agency Power Blow Off Valve Kit on the 2018 – 2019 Kia Stinger GT with 3.3L TT V6. NOTE: Agency Power recommends priming the BOV before installation to make sure piston moves freely. Unscrew cap to open with spring. Gently push brass… Read More
How To Install Agency Power Cold Air Intake System On MINI Cooper
This Install Guide is intended to help with the installation of the Agency Power Cold Air Intake Kit on the 2014 – 2018 MINI Cooper 1.5L | Cooper S 2.0L. INSTALL DIFFICULTY: Remove engine cover by pulling up to have access to intake system. Unbolt the air box from the support next… Read More
How To Install Agency Power Cold Air Intake System On BMW M3 / M4
This Install Guide is intended to help with the installation of the Agency Power Cold Air Intake Kit on the 2015 – 2018 BMW M3 F80 / M4 F82/F83. Trimming is required for proper intake fitment. Agency Power recommends custom calibration to prevent check engine lights. INSTALL DIFFICULTY: Remove carbon fiber strut… Read More
