Agency Power Billet Pitch Stop Mount Subaru WRX/STI 02+ Installation Guide – AP-GDA-165

By Upscale Automotive – View Product Information Here

“Your Subaru WRX or STI is not complete without one of the all new Agency Power Billet Pitch Stop Mounts. These CNC machined 6061 aluminum pitch stop mounts replace your factory unit with a strong, stylish, and functional piece. The AP mount features a urethane bushing with a durometer of 88 to assist in reducing transmission movement. Improve your performance both on and off the track by increasing rigidity in your motor and transmission. The bushing fits perfect with the included stainless steel sleeve. Each Agency Power Pitch Stop Mount comes in a polished aluminum with the Agency Power logo laser engraved. It is designed to work with all Subaru WRX and STI from 2002 and up.”

Installation:

Step 1: Prepare Tools and Work Area In almost every case, when working on your vehicle, you should let your engine cool and disconnect your negative battery terminal before beginning – this installation is no different. This installation will require no special tools, not even a jack. All you will need is a simple ratcheting wrench set with metric sockets. At this point, you can go ahead and remove the Agency Power Billet Pitch Stop Mount from its package. Go ahead and take a minute to admire it before you put it to work! Once you are finished drooling over how much better this mount is than the stock version, move on with the install!

Step 2: Locate Stock Pitch Stop Mount Your stock pitch stop mount is very easy to locate. Simply look in the center of the engine bay behind your engine. You will see a black plastic bone-shaped brace connecting the engine to the firewall. This is your pitch stop mount!

Step 3: Remove Stock Pitch Stop Mount Although the stock pitch stop mount may appear to be under load, it actually is not. You can simply put your ratcheting wrench to work at this point and remove the bolts that are holding the stock pitch stop mount in place. Once these bolts are removed, be sure to keep track of them as you will be re-using them. Now, simply pop or slide the stock pitch stop mount out of place and remove it from your engine bay.

Step 4: Install Agency Power Billet Pitch Stop Mount Now is the fun part – installing the Agency Power upgrade! There is nothing more to this than orienting the Agency Power mount just like the stock mount was oriented, then sliding the factory bolts back in place. Tighten the bolts securely into place and you are all done! Now you can admire and show off your new Agency Power part!