Swapping out the belt in your Can-Am X3 can be a major pain especially if you want to get back out to ride with your friends. It can be difficult to remove the belt cover on your X3 and this adds extra frustration. Agency Power solves this issue with the quick-release belt cover kit to make your life easier and significantly reduce the amount of time it takes to swap out your belt.

Since the factory mounting solution requires the bolts to be removed and set aside, it is common to lose hardware. Many owners remove the belt cover altogether to avoid the hassle. Not running a belt cover can be a risky move as dirt, dust, and rocks can easily get caught in your clutches and cause even more of a headache.

Purchase Your Quick Release Belt Cover Kit Here!

The Agency Power quick release belt cover hardware installs in a matter of minutes. Simply remove your old hardware and thread in the new studs and rivet the tethers to the belt cover. Once installed, the front belt cover will slide over the studs and the pins can slide through the holes in the studs.

Keeping the covers sealed was our main priority when developing the quick release kit. The studs can be threaded further into the rear belt cover to provide a tighter fit and seal. The 10 studs and pins will secure the belt cover while preventing dirt, dust, rocks, and water from making their way into the clutching system.

When the time comes to replace your belt simply remove the pins and pull the cover off. Once the belt has been replaced, the cover can slide back on and pins put back in place to seal the cover. You will save heaps of time and headaches using the Agency Power quick release belt cover kit.

Features:

• Stainless steel CNC machined pins
• Stainless steel lanyards
• Change a belt much faster
• Easy installation
• Lanyards hold clips so no lost hardware in the dirt during belt change
• Kit Includes Pins, Lanyard, Rivets, Washers, and Clips