How To Install Agency Power Lightweight Under-Drive Crank Pulley on VW 2.0L TDI
This Install Guide is intended to help with the installation of the Agency Power Lightweight Under-Drive Crank Pulley on the Volkswagen 2.0L TDI Engine. 2015-201 Audi A3 (8P) 2015-2019 VW Golf 7 Sedan & SportWagen 2015-2019 VW Beetle 2015-2019 VW Jetta VI 2015-2019 VW Passat Remove passenger side lower fender liner. Using… Read More
How To Install Agency Power Hood Latch for Ford Focus
This Install Guide is intended to help with the installation of the Agency Power Hood Latch on the 2012 – 2018 Ford Focus All Models Including ST / RS. Remove the factory hood latch cable. Remove a few of the push pins holding radiator shroud to support. This will allow access to the hood… Read More
How To Install Agency Power Mercedes Benz G-Class Exhaust System Includes 4×4 Squared
This guide is to help with the installation of the Agency Power Exhaust for Mercedes Benz G-Class Including 4×4². Install Level: Find the 3 bolt flange connecting muffler to mid pipe on each side of the vehicle. Agency Power recommends spraying some penetrating oil on the bolts to allow for easier removal. Remove the… Read More
How To Install Agency Power VW GTi Mk7 Catback Exhaust System
This guide is to help with the installation of the Agency Power Catback Exhaust for VW GTi Mk7. Install Level: Remove 4 bolts holding brace and put to side to be re-installed later. Unbolt factory slip fit clamp. Then push 3 hangers out of bushing to remove the factory system. Once removed… Read More
How To Install Agency Power Cold Air Intake System On Kia Stinger GT
This Install Guide is intended to help with the installation of the Agency Power Cold Air Intake System on the 2018 – 2019 Kia Stinger GT with 3.3L TT V6. A PDF of these instructions can be found HERE Unbolt 2 bolts holding cross support bar on driver then repeat on passenger side.… Read More
How To Install Agency Power Air Intake Polaris RZR 900S | 1000S
This Install Guide is intended to help with the installation of the Agency Power Air Intake System on the 2015-2019 POLARIS RZR 900S | 1000S. Remove engine cover. Unbolt the 4 bolts that hold the rear section of bed in place. Keep for re-installation. Agency Power recommends removing the seats for easier… Read More
