How to Install an Agency Power Carbon Fiber Y-Pipe in a Porsche 997.2 Turbo S
This Porsche 997.2 Turbo S had the Agency Power prototype in it. This is the same Porsche 997.2 Turbo S that was in the Targa New Foundland. We are now replacing it with the newest version of Agency Power Carbon Y-Pipe for the 997.2 Turbo S. The top version is the old Y-Pipe prototype. You can tell because the edges of the tubing have a lip on them. The newer version is smooth and has no lip.
This is what it should look like when it is set in place.
The first step to installing anΒ Agency Power Carbon Fiber Y-Pipe is to connect the driver side intercooler coupler. The bottom picture is what it looks like completed.
Next, connect the passenger side intercooler coupler.
Once both driver and passenger side intercoolers couplers are securely connected the next step is to connect the throttle body coupler. To avoid complications ensure that the throttle body is completely connected. The bottom picture is what it should look like once it is connected.
The next step to installing an Agency Power Carbon Y-Pipe is to connect the circulation valves on each side. The bottom picture is what it should look like once it is completed.
The final step to installing an Agency Power Carbon Fiber Y-Pipe is to connect the last three auxiliary hoses.
Once those are connected your Agency Power Carbon Fiber Y-Pipe is ready to be tested. Send us a picture of your installed Agency Power Carbon Fiber Y-Pipe. Here is a video of the Agency Power Carbon Fiber Porsche Panamera Turbo Y-Pipe Kit.
https://www.agencypower.com/catalog/intercooler-pipes-c-4266_4315.html?osCsid=ko1tepa1a9659ivvnsn2f8nli1