This Install Guide is intended to help with the installation of the Agency Power Weighted Shift Knob for 2010-2019 VW GTi and 2015-2019 Golf R.

Remove the shifter boot. Push the 2 locking tabs forward and pull up on bezel.

Using a small screw driver place in the loop of the strap and loosen strap by moving sideways until able to remove shift knob.

Using the bottom edge of the knob as a guide cut the factory boot off.

Place shift knob into boot. Secure the boot with the zip ties and reinstall shifter boot.

Align shifter on shaft to your desired height and tighten the 4 set screws with allen wrench. Agency Power recommends adding loctite to the screws before final install.

Re Install shifter boot surround.

Installation is Complete.