This guide is to help with the installation of the Agency Power Catback Exhaust for VW GTi Mk7.

Install Level: 

Remove 4 bolts holding brace and put to side to be re-installed later.

Unbolt factory slip fit clamp. Then push 3 hangers out of bushing to remove the factory system.

Once removed find the hanger on the drive side that is unused on the factory system. Add the provided bushing.

Install the small slip fit pipe with clamps onto factory. Then add the mid-pipe with larger resonator towards front of car and place in hanger in bushing. Loosely clamp.

Add the next resonator section and then Y pipe. Loosely clamping in place and inserting hangers into bushings.

Install tips and clamps loosely.

Working from back to front tighten clamps and adjust exhaust into position.

Re-Install the cross bar and 4 bolts.

Congratulations you have installed the Agency Power VW GTi Mk7 Exhaust.