How To Install Agency Power Mercedes Benz G-Class Exhaust System Includes 4×4 Squared
This guide is to help with the installation of the Agency Power Exhaust for Mercedes Benz G-Class Including 4×4².
Install Level: 
Find the 3 bolt flange connecting muffler to mid pipe on each side of the vehicle. Agency Power recommends spraying some penetrating oil on the bolts to allow for easier removal.
Remove the 3 bolts and nuts. Keep to re-use on install.
Carefully pull flange and pipe apart.
Carefully pull the 2 hangers out of rear bushings.
Slide new exhaust hangers into bushings.
Re-install flange and re-bolt the nuts.
Repeat on other side. Remove the 3 bolts and nuts. Keep to re-use on install.
Carefully pull flange and pipe apart.
Carefully pull the 2 hangers out of rear bushings.
Slide new exhaust hangers into bushings.
Re-install flange and re-bolt the nuts.
Thanks, was easy to follow directions and install was pretty quick.
Glad these instruction helped you out! 🙂
Where is the ideal place to put the control module and what is a good source to tap for 12v power?
It is ideal to mount the control box inside the cab to keep it out of the elements. You’ll tap into a 12v source from the ignition cylinder.