This Install Guide is intended to help with the installation of the Agency Power Hood Latch on the 2012 – 2018 Ford Focus All Models Including ST / RS.

Remove the factory hood latch cable.

Remove a few of the push pins holding radiator shroud to support. This will allow access to the hood latch base. Un-clip and remove from shroud.

Carefully squeeze the 3 tabs in center of the factory hood latch. Pull apart hood latch from base.

Line up the factory spring and insert the new Agency Power hood latch on.

With snap ring pliers install the supplied snap ring at base of new hood latch.

Re-install the hood latch cable.

Place base back into shroud and snap into place. Secure the cable back into the base. Re-install push pins removed to allow access to shroud.