This guide is to help with the installation of the Agency Power Catback Exhaust for Honda Civic.

Install Level: 

Unclip and unbolt the car underbody shields.

Unbolt the 3 flange bolts.

Carefully remove the factory exhaust from the hanger bushings. And lower the factory exhaust off the car.

With factory system removed. Install new rear exhaust section into the hanger bushings.

Once placed in bushing install the gasket on the 3 bolt flange.

Insert mid pipe into hanger bushing and hand tighten nuts on flange bolts.

Place center section in place and loosely install bolts.

Tighten bolts starting at 3 bolt flange and adjusting exhaust accordingly.

Reinstall underbody shield.

Congratulations you have installed your Honda Civic Exhaust.