This guide is to assist with the installation of the Agency Power Carbon Fiber Side Air Ducts on the 2014-2015 Porsche 991 Turbo.

Step 1

Remove the OEM plastic air ducts from the retainer clips by reaching into the duct and grabbing the backside of the vent and pulling evenly towards the front of the vehicle to free the air duct. Follow the same procedure for both driver & passenger side of the vehicle.

Step #2

Once the the OEM vents have been removed from the vehicle you can now prepare them for installation. We recommend using a 50:50 mixture of isopropyl alcohol and water. Thoroughly wipe down each OEM vent including the backside of the Agency Power Carbon Fiber Vents to ensure proper adhesion using the 3M double side tape. Be cautious not to scratch any of the carbon parts. Use clean microfiber towels to clean the surface of the carbon fiber vents.

Step #3

Apply the 3M double sided tap to the back sides of each vent like shown in the images. (Repeat this step for both passenger and driver side vents)

Step #4

Attach the Agency Power Carbon Air Duct to the OEM duct by holding each together in your hand and cupping them together. Start with one side at a time and slowly being the two vents together. Ensure the vents are lined up properly before applying any pressure.  (Repeat this step for both passenger and driver side vents)

Step #5

Gently massage the outer edge of the vent to ensure the 3M double side tape has bonded securely. (Repeat this step for both passenger and driver side vents)

Step #6

Now that you have installed your new Agency Power Carbon Vents over the original Porsche vents you can now begin the final step by reinstalling them back onto the Porsche. Do this by lining up the clips and applying even pressure until the vent is clipped back into place.  (Repeat this step for both passenger and driver side vents)

Step #7

Enjoy the new look of your Porsche 991 Turbo with the Agency Power Carbon Carbon Fiber Side Vents.

Click here for more information on this product.

If you have any questions please contact us by calling 1-480-921-7422.