23Mar
How To Install Agency Power Blow Off Valve Adapter on a Volkswagen GTI
This Install Guide is intended to help with the installation of the Agency Power Blow Off Valve Adapter on a Volkswagen GTi MK7.
- Remove the air intake tube to gain access. Use pliers to allow clamp at air box to open. Loosen clamp on back of the intake tube.
- With tube out of the way. Find the bypass harness and unplug.
- With harness unplugged remove the 3 bolts and bypass valve.
- With the new adapter align the notch and the wiring harness with bypass valve.
- Install them into the turbo housing. Wiring harness should align to same position as factory.
- With the new provided longer bolts tighten the bypass and spacer to the turbo housing.
- Reinstall the disconnected wiring harness.
- Reinstall the intake tube. Position and tighten the clamps.
- Install is now complete.