1. Make sure that the Spoiler is in the fully extended position with the help of your spoiler deployment button on the center console.

2. Locate the keyhole in the spoiler rods and the stock spoiler comes off lefty loosey you will need to have some type of spanner wrench like the one in the photo this is one that one of our technicians has made for this project but anything similar that you can get in there that fits the keyhole and wont damage anything will work fine.

3. This would be a good place to have another person in order to make sure you don’t damage the car or the spoiler while installing. Remove old spoiler using the the spanner wrench tool and install new spoiler using the righty tightey method(technical term) make sure the spoiler is on snug. You can start the spoiler on the bolt end that are attached to the spoiler rods by hand then snug them up with the spanner wrench. You don’t want this baby to come off when you’re at Mach 1 down the 101.

4. Enjoy your GT2 Style full Carbon Spoiler it will function just like your stock spoiler but more awesome and stylish. To complete that 997 project look check out the Agency Power Performance parts lineup for the 997.

and a Photo of what it looks like when painted leaving just the last edge of Carbon Visible.