The high revving V8 twin turbocharged S63 engine in the BMW F10 M5 produces a very impressive 560hp.  Sprinting from 0-62mph in just 4.4 seconds, the new F10 chassis is extremely quick.  With the design of the new F10 M5 to be much more efficient over the previous E60, many key components are made of high grade composite material to keep it lightweight.  With that much performance, alot of heat can be generated under the hood.  Even with its functional cold air intake system and heat extractors for the turbochargers, heat is always an engines worst enemy.

Agency Power now offers this DTM style vented carbon fiber hood to help with heat extracting while adding supreme style to your BMW F10.  The hood is made from high quality 2×2 carbon fiber weave which is finished in a glossy automotive clear coat.  Its underside is a durable FRP construction which retains all factory hardware for an OEM type finish.  The vents feature a very subtle mesh insert in silver.

If the side vents are a bit much we offer an alternative stylized bump in the center of the hood gives the new F10 a much more aggressive look then the previous E60 chassis.  Without being overly aggressive, the elongated vents keep the OEM style to the hood while providing functionality to the 560hp V8 twin turbo M5.  With the same constructions as its later with a 2×2 carbon weave finished in a gloss clear, you really can not go wrong with either.  The hood can be installed on any BMW F10 chassis in the raw carbon fiber style as pictured or painted to match your vehicle.  Both hoods fit all F10 vehicles including the 528, 535, 550, and M5 from 2011+.

The BMW F10 M5 design was influenced by BMW’s EfficientDynamics program to lower the weight of the car.  With the new V8 4.4L twin turbo engine making 560HP, this car still comes in slightly heavier then the previous E60 M5.  The improved body styling and enhanced fuel economy comes from its overall and key components done in composites which truly make the F10 M5 worth the extra weight.  To further the look and styling as the predecessor to the E60, Agency Power has enhanced the BMW F10 M5 with this carbon fiber rear diffuser.

The rear diffuser is designed to offer a more aggressive look while improving upon aerodynamics with its individual air foil style.  Also made from 2×2 weave carbon fiber and a high gloss clear coat finish, this part is designed as a complete OEM replacement, the diffuser attaches to OEM hardware in place of the factory part.  You can leave it raw showing off the stunning carbon design or paint match it.  This part is only designed to fit the BMW F10 M5 and will fit with both the OEM and larger quad tip exhaust systems.

Complimenting our carbon fiber hoods, carbon fiber trunk, and carbon fiber rear diffuser, this front lip spoiler completes the package with an outstanding look. The 2×2 carbon fiber weave features a ultra high glossy clear coat with UV protection.  Designed to fit the stock M5 F10 front bumper, it is a simple add on to give the front a more aggressive look.  The front bumper lip spoiler wraps around the side fender well and follows the curves of the front end.  Attaching with double sided tape and self tapping screws, this will be one of the best upgrades you will do to your M5.