UTVs take a beating, especially if you are the type to go fast, jump, and abuse your machine. A common issue that has been becoming a big deal is dirt, rocks, and other debris getting flung into the rear wheels. This can cause damage to your wheels, brakes, and even wheel bearings. Agency Power released mud flaps to prevent inevitable damage to these vital components.

Find Out More HERE

When dirt and other debris get into the brakes, it can severely decrease the life of your pads and rotors as it is comparable to putting sandpaper between them. Wheel bearings can take quite a beating without the use of mud flaps as the dust and dirt can work their way into the bearing. Once the dirt has merged with grease, your wheel bearings will wear out in a short period as the grit starts deteriorating the rollers.

Installing the Agency Power mud flaps is simple thanks to the laser-cut bracket that attaches to the rear lower trailing arm. The factory hardware is used to prevent the need to modify your machine to fit the mud flaps and further the ease of installation. Precision fitment was achieved thanks to 3D scanning and CAD modeling.

The rugged 2.25mm stainless steel construction provides rigidity so your flaps won’t get bent out of place after driving through thick mud. A textured black powder coat finish was applied to prevent corrosion while also giving a sleek look after it’s installed on your machine.

Purchase Your Mud Flaps Here!

Features:

• Protects your brakes and wheel bearings from rocks, dirt, and mud
• 3/8th thick 10″x14″ flap for rigidity
• Laser-cut bracket provides a sturdy mounting solution
• Textured black powder coat prevents rust and corrosion
• Utilizes factory hardware and mounting location
• Precise fitment thanks to 3D scanning and CAD modeling
• No modification is required for installation
• Installs in a matter of minutes